EUDAX Manual for Double sided adhesive

八月 11, 2017

EUDAX Manual for Double sided adhesive

How to use double-sided adhesive?

1、Make sure the the surface of both parts you want to glue together is flat,Clean and dry.

2、Make sure the temperature during application is at least room or a little higher (70F - 90F),Before use, Let the double sided pad to cause friction on the desk that will have a better effect(30 second).

3、Peel the film from one side and apply to the chosen spot. The adhesive tape is applied to the adhesive surface and the pressure of approximately 15PSI (1.05 kg / cm2) is fed by rollers,hands or otherwise, so that it is effectively bonded.Then wait for 30 minutes.

NOTICE:

The adhesive tape is applied to the adhesive surface and the pressure of approximately 15PSI (1.05 kg / cm2) is fed by rollers,hands or otherwise, so that it is effectively bonded.Then wait for 30 minutes.

4、Peel other side and apply to the other chosen spot. The adhesive tape is applied to the adhesive surface and the pressure of approximately 15PSI (1.05 kg / cm2) is fed by rollers,hands or otherwise, so that it is effectively bonded.Then wait for 30 minutes.Wait for 24 hours before use If you need to hang items.

NOTICE:

1,Do not use in the car windshield, the temperature is too high, double-sided adhesive will melt, affect the sticky effect.

2,Do not use on fragile items, if you want to use in the mirror, please ensure that the mirror weight does not exceed 0.5 KG,the walls are flat,clean and dry, and paste enough double-sided adhesive.